Medical Air Plants
It can be understood from the introduction of the Medical Air Plant, which is in our medical gas systems group.
- It is a central system used to supply the medical air required for hospital departments. It is capable of providing a flow rate of 10 bar with one compressor not running (after dryer losses) (MES C11, HTM2022)
- Depending on the project or system capacity, 2 or 3 compressors are used. Each can provide 10 bar air pressure (class F, BS 1999)
- Vertical or horizontal air vessel is used depending on the project or system capacity. When using a horizontal tank, compressors can be mounted on the tank (EN 286, BS 5169/1975 Class 3 Grade E)
- Air delivery is via duplex sets of filters, pre-filter, dust filter, activated carbon filter and bacterial filter (BS 7226:1989)
- Duplex desiccant is used for air drying. It is controlled by a separate control panel and incorporate a dew point alarm system
- Equal-time operation of each compressor is ensured by the automatic control panel (IEE, BS 4941)
- 4-7 bar regulation group with by-pass allows air pressure to be adjusted according to the places to be used
- MDD 93/42/EEC, Class IIb Medical Devices
| PRODUCT CODE | COMP. CAPACITY | |||
| PP-MAS-235 | 2 x 35 m³/h | |||
| PP-MAS-240 | 2 x 40 m³/h | |||
| PP-MAS-260 | 2 x 60 m³/h | |||
| PP-MAS-290 | 2 x 90 m³/h | |||
| PP-MAS-2110 | 2 x 110 m³/h | |||
| PP-MAS-2150 | 2 x 150 m³/h | |||
| PP-MAS-2200 | 2 x 200 m³/h | |||
| PP-MAS-2250 | 2 x 250 m³/h | |||
| PP-MAS-2300 | 2 x 300 m³/h | |||
| PRODUCT CODE | COMP. CAPACITY | |||
| PP-MAS-335 | 3 x 35 m³/h | |||
| PP-MAS-340 | 3 x 40 m³/h | |||
| PP-MAS-360 | 3 x 60 m³/h | |||
| PP-MAS-390 | 3 x 90 m³/h | |||
| PP-MAS-3110 | 3 x 110 m³/h | |||
| PP-MAS-3150 | 3 x 150 m³/h | |||
| PP-MAS-3200 | 3 x 200 m³/h | |||
| PP-MAS-3250 | 3 x 250 m³/h | |||
| PP-MAS-3300 | 3 x 300 m³/h | |||